import tkinter as tk from tkinter import ttk import socket import threading import time from db import DB from udpMsg import ( msg_disHighVolBusFbMsg, msg_disHighAVolBusFbMsg, msg_disLowMainBusFbMsg, msg_disLowBusFbMsg, msg_disHVBCmdMsg, msg_disHVBACmdMsg, msg_disLVMBCmdMsg, msg_disLVBCmdMsg ) class PowerManagerApp: def __init__(self, root): self.root = root # 解决字体模糊问题 style = ttk.Style() style.configure('.', font=('Microsoft YaHei', 10)) self.root.title("电源管理系统") self.root.geometry("1200x800") self.root.tk.call('tk', 'scaling', 1.5) # 适配高DPI显示 # UDP通信配置 self.udp_ip = "127.0.0.1" self.udp_port = 5000 self.sock = socket.socket(socket.AF_INET, socket.SOCK_DGRAM) self.sock.bind((self.udp_ip, self.udp_port)) # 数据库配置 self.db = DB('/home/zjk/project/H100/H100PowerManger/test/disSysTest/test.db') self.db.connect() # 状态数据 - 完全匹配udpMsg.py中的定义 self.status_data = { "high_vol_bus": { "breakers": { "燃料电池断路器": 0, "动力锂电池断路器": 0, "推进电机断路器": 0, "锂电池组仪表断路器": 0, "DC/DC模块断路器": 0, "艏高压配电盒断路器": 0, "艉FT设备45断路器": 0, "艉舵机开关1断路器": 0, "艉舵机开关2断路器": 0, "FB备用断路器": 0, "TYZ备用断路器": 0, "备用断路器": 0 }, "faults": { "DC/DC故障1": 0, "DC/DC故障2": 0 }, "insulation": { "动力母线绝缘状态": 0, "A母线绝缘状态": 0 }, "alarms": { "仪表电源丢失信号": 0, "应急电源丢失信号": 0 }, "voltage": { "动力母线电压": 0.0, "A母线电压": 0.0 }, "current": { "动力母线电流": 0.0, "DC/DC5模块电流": 0.0, "推进电机控制箱电流": 0.0, "A母线电流": 0.0, "锂电池组仪表电流": 0.0, "艏高压配电盒电流": 0.0, "艉FT设备45电流": 0.0, "TYZ备用开关电流": 0.0, "艉舵机开关1电流": 0.0, "备用电流1": 0.0, "艉舵机开关2电流": 0.0, "备用电流2": 0.0, "FB备用开关电流": 0.0, "备用电流3": 0.0 }, "cool_water_pressure": 0.0 }, "high_a_vol_bus": { "breakers": { "艏FT设备123断路器": 0, "执行机构断路器": 0, "桅舵机控制箱断路器": 0, "XCZ断路器": 0, "艏舵控制箱断路器": 0, "开盖启动气缸断路器": 0 }, "alarms": { "仪表电源故障": 0, "应急电源故障": 0, "进水报警": 0 }, "voltage": { "B母线电压": 0.0 }, "current": { "B母线电流": 0.0, "艏FT设备123电流": 0.0, "执行机构电流": 0.0, "桅舵机控制箱电流": 0.0, "XCZ电流": 0.0, "艏舵控制箱电流": 0.0, "开盖启动气缸电流": 0.0 } }, "low_main_bus": { "breakers": { "锂电池组仪表断路器": 0, "艏低压配电盒断路器": 0, "单元4仪表48V断路器": 0, "DC/C1直流配电板断路器": 0, "备用断路器1": 0, "备用断路器2": 0, "应急锂电池组2断路器": 0 }, "alarms": { "仪表电源故障": 0, "应急电源故障": 0 }, "insulation": 0, "voltage": { "仪表母线电压": 0.0, "应急2母线电压": 0.0 }, "current": { "艏低压配电盒电流": 0.0, "DC/C1仪表48V电流": 0.0, "备用电流1": 0.0, "应急锂电池组2电流": 0.0, "锂电池组仪表电流": 0.0, "单元4仪表48V电流": 0.0, "备用电流2": 0.0, "综合能量管理系统应急DC48V电流": 0.0, "燃料电池安全系统应急DC48V电流": 0.0, "PLC控制电源电流": 0.0 } }, "low_bus": { "breakers": { "单元1断路器": 0, "单元2断路器": 0, "单元3断路器": 0, "单元5断路器": 0, "艏PZ设备断路器": 0, "备用断路器1": 0, "备用断路器2": 0, "应急锂电池组1断路器": 0 }, "alarms": { "电源故障信号": 0, "进水报警": 0 }, "voltage": { "仪表母线电压": 0.0, "应急1母线电压": 0.0 }, "current": { "仪表母线电流": 0.0, "单元1电流": 0.0, "单元2电流": 0.0, "单元3电流": 0.0, "单元5电流": 0.0, "艏PZ设备电流": 0.0, "应急锂电池组1电流": 0.0 } } } # 初始化界面 self.setup_ui() # 启动UDP接收线程 self.running = True self.recv_thread = threading.Thread(target=self.udp_receive_loop) self.recv_thread.daemon = True self.recv_thread.start() # 启动状态更新定时器 self.update_ui() def setup_ui(self): """初始化用户界面""" # 主框架 main_frame = ttk.Frame(self.root, padding="10") main_frame.pack(fill=tk.BOTH, expand=True) # 状态显示区 status_frame = ttk.LabelFrame(main_frame, text="系统状态", padding="10") status_frame.pack(fill=tk.X, pady=5) # 状态显示区 - 使用Notebook组织不同母线状态 self.notebook = ttk.Notebook(status_frame) self.notebook.pack(fill=tk.BOTH, expand=True, padx=5, pady=5) # 高压母线状态页 high_vol_frame = ttk.Frame(self.notebook) self.notebook.add(high_vol_frame, text="高压母线") self.setup_high_vol_ui(high_vol_frame) # 高压A母线状态页 high_a_vol_frame = ttk.Frame(self.notebook) self.notebook.add(high_a_vol_frame, text="高压A母线") self.setup_high_a_vol_ui(high_a_vol_frame) # 仪表主母线状态页 low_main_frame = ttk.Frame(self.notebook) self.notebook.add(low_main_frame, text="仪表主母线") self.setup_low_main_ui(low_main_frame) # 仪表母线状态页 low_bus_frame = ttk.Frame(self.notebook) self.notebook.add(low_bus_frame, text="仪表母线") self.setup_low_bus_ui(low_bus_frame) # 控制区 control_frame = ttk.LabelFrame(main_frame, text="控制面板", padding="10") control_frame.pack(fill=tk.BOTH, expand=True, pady=5) # 状态显示区 - 使用Notebook组织不同母线状态 self.notebook_c = ttk.Notebook(control_frame) self.notebook_c.pack(fill=tk.BOTH, expand=True, padx=5, pady=5) high_vol_control_frame = ttk.Frame(self.notebook_c) self.notebook_c.add(high_vol_control_frame, text="高压母线") self.setup_hvb_control(high_vol_control_frame) high_a_vol_control_frame = ttk.Frame(self.notebook_c) self.notebook_c.add(high_a_vol_control_frame, text="高压A母线") self.setup_hvba_control(high_a_vol_control_frame) low_main_control_frame = ttk.Frame(self.notebook_c) self.notebook_c.add(low_main_control_frame, text="仪表主母线") self.setup_lvmb_control(low_main_control_frame) low_bus_control_frame = ttk.Frame(self.notebook_c) self.notebook_c.add(low_bus_control_frame, text="仪表母线") self.setup_lvb_control(low_bus_control_frame) # 日志区 log_frame = ttk.LabelFrame(main_frame, text="系统日志", padding="10") log_frame.pack(fill=tk.BOTH, expand=True, pady=5) self.log_text = tk.Text(log_frame, height=10, state=tk.DISABLED) self.log_text.pack(fill=tk.BOTH, expand=True) scrollbar = ttk.Scrollbar(log_frame, orient=tk.VERTICAL, command=self.log_text.yview) scrollbar.pack(side=tk.RIGHT, fill=tk.Y) self.log_text.config(yscrollcommand=scrollbar.set) def setup_hvb_control(self, parent): """设置动力母线配电指令控制面板""" frame = ttk.LabelFrame(parent, text="动力母线配电指令", padding="10") frame.pack(fill=tk.X, pady=5) # 断路器控制按钮 breaker_names = [ "燃料电池断路器", "动力锂电池断路器", "推进电机断路器", "锂电池组仪表断路器", "DC/DC模块断路器", "艏高压配电盒断路器", "艉FT设备45断路器", "艉舵机开关1断路器", "艉舵机开关2断路器", "FB备用断路器", "TYZ备用断路器", "备用断路器", "DC/DC模块启动","冷却系统启动" ] for i, name in enumerate(breaker_names): row = i // 3 col = i % 3 btn_frame = ttk.Frame(frame) btn_frame.grid(row=row, column=col, padx=5, pady=2, sticky=tk.W) ttk.Label(btn_frame, text=name).pack(side=tk.LEFT) on_btn = ttk.Button(btn_frame, text="合", width=3, command=lambda n=name: self.send_hvb_cmd(n, 0x55)) on_btn.pack(side=tk.LEFT, padx=2) off_btn = ttk.Button(btn_frame, text="分", width=3, command=lambda n=name: self.send_hvb_cmd(n, 0xAA)) off_btn.pack(side=tk.LEFT, padx=2) def setup_hvba_control(self, parent): """设置动力汇流排A配电指令控制面板""" frame = ttk.LabelFrame(parent, text="动力汇流排A配电指令", padding="10") frame.pack(fill=tk.X, pady=5) # 断路器控制按钮 breaker_names = [ "艏FT设备123断路器", "执行机构断路器", "桅舵机控制箱断路器", "XCZ断路器", "艏舵控制箱断路器", "开盖启动气缸断路器" ] for i, name in enumerate(breaker_names): row = i // 3 col = i % 3 btn_frame = ttk.Frame(frame) btn_frame.grid(row=row, column=col, padx=5, pady=2, sticky=tk.W) ttk.Label(btn_frame, text=name).pack(side=tk.LEFT) on_btn = ttk.Button(btn_frame, text="合", width=3, command=lambda n=name: self.send_hvba_cmd(n, 1)) on_btn.pack(side=tk.LEFT, padx=2) off_btn = ttk.Button(btn_frame, text="分", width=3, command=lambda n=name: self.send_hvba_cmd(n, 0)) off_btn.pack(side=tk.LEFT, padx=2) def setup_lvmb_control(self, parent): """设置仪表母线配电指令控制面板""" frame = ttk.LabelFrame(parent, text="仪表母线配电指令", padding="10") frame.pack(fill=tk.X, pady=5) # 断路器控制按钮 breaker_names = [ "锂电池组仪表断路器", "艏低压配电盒断路器", "单元4仪表48V断路器", "DC/C1直流配电板断路器", "备用断路器1", "备用断路器2", "应急锂电池组2断路器" ] for i, name in enumerate(breaker_names): row = i // 3 col = i % 3 btn_frame = ttk.Frame(frame) btn_frame.grid(row=row, column=col, padx=5, pady=2, sticky=tk.W) ttk.Label(btn_frame, text=name).pack(side=tk.LEFT) on_btn = ttk.Button(btn_frame, text="合", width=3, command=lambda n=name: self.send_lvmb_cmd(n, 0x55)) on_btn.pack(side=tk.LEFT, padx=2) off_btn = ttk.Button(btn_frame, text="分", width=3, command=lambda n=name: self.send_lvmb_cmd(n, 0xaa)) off_btn.pack(side=tk.LEFT, padx=2) def setup_lvb_control(self, parent): """设置仪表汇流排配电指令控制面板""" frame = ttk.LabelFrame(parent, text="仪表汇流排配电指令", padding="10") frame.pack(fill=tk.X, pady=5) # 断路器控制按钮 breaker_names = [ "单元1断路器", "单元2断路器", "单元3断路器", "单元5断路器", "艏PZ设备断路器", "备用断路器1", "备用断路器2", "应急锂电池组1断路器" ] for i, name in enumerate(breaker_names): row = i // 3 col = i % 3 btn_frame = ttk.Frame(frame) btn_frame.grid(row=row, column=col, padx=5, pady=2, sticky=tk.W) ttk.Label(btn_frame, text=name).pack(side=tk.LEFT) on_btn = ttk.Button(btn_frame, text="合", width=3, command=lambda n=name: self.send_lvb_cmd(n, 0x55)) on_btn.pack(side=tk.LEFT, padx=2) off_btn = ttk.Button(btn_frame, text="分", width=3, command=lambda n=name: self.send_lvb_cmd(n, 0xaa)) off_btn.pack(side=tk.LEFT, padx=2) def send_hvb_cmd(self, breaker_name, state): """发送动力母线配电指令""" cmd = msg_disHVBCmdMsg() if breaker_name == "燃料电池断路器": cmd.fuelCellCircuitBreaker = state elif breaker_name == "动力锂电池断路器": cmd.powerLithiumBatteryCircuitBreaker = state elif breaker_name == "推进电机断路器": cmd.propulsionMotorCircuitBreaker = state elif breaker_name == "锂电池组仪表断路器": cmd.lithiumBatteryGroupInstrumentCircuitBreaker = state elif breaker_name == "DC/DC模块断路器": cmd.dcDc5ModuleCircuitBreaker = state elif breaker_name == "艏高压配电盒断路器": cmd.bowHighVoltageDistributionBoxCircuitBreaker = state elif breaker_name == "艉FT设备45断路器": cmd.sternFTDevice45CircuitBreaker = state elif breaker_name == "艉舵机开关1断路器": cmd.sternRudderSwitch1CircuitBreaker = state elif breaker_name == "艉舵机开关2断路器": cmd.sternRudderSwitch2CircuitBreaker = state elif breaker_name == "FB备用断路器": cmd.fbReservedCircuitBreaker = state elif breaker_name == "TYZ备用断路器": cmd.tyzReservedCircuitBreaker = state elif breaker_name == "备用断路器": cmd.reservedCircuitBreaker = state elif breaker_name == "DC/DC模块启动": cmd.dcDcModuleStart = state elif breaker_name == "冷却系统启动": cmd.coolingSystemStart = state self.send_udp_command(cmd.pack()) self.db.insertHighVolBusCmd(cmd) self.log_message(f"发送动力母线配电指令: {breaker_name} {'合' if state else '分'}") def send_hvba_cmd(self, breaker_name, state): """发送动力汇流排A配电指令""" cmd = msg_disHVBACmdMsg() if breaker_name == "艏FT设备123断路器": cmd.bowFTDevice123CircuitBreaker = state elif breaker_name == "执行机构断路器": cmd.actuatorCircuitBreaker = state elif breaker_name == "桅舵机控制箱断路器": cmd.mastSteeringGearControlBoxCircuitBreaker = state elif breaker_name == "XCZ断路器": cmd.xczCircuitBreaker = state elif breaker_name == "艏舵控制箱断路器": cmd.bowRudderControlBoxCircuitBreaker = state elif breaker_name == "开盖启动气缸断路器": cmd.openWaterCoverStartCylinderCircuitBreaker = state self.send_udp_command(cmd.pack()) self.db.insertHighAVolBusCmd(cmd) self.log_message(f"发送动力汇流排A配电指令: {breaker_name} {'合' if state else '分'}") def send_lvmb_cmd(self, breaker_name, state): """发送仪表母线配电指令""" cmd = msg_disLVMBCmdMsg() if breaker_name == "锂电池组仪表断路器": cmd.lithiumBatteryGroupInstrumentCircuitBreaker = state elif breaker_name == "艏低压配电盒断路器": cmd.bowLowVoltageDistributionBoxCircuitBreaker = state elif breaker_name == "单元4仪表48V断路器": cmd.unit4InstrumentDC48VCircuitBreaker = state elif breaker_name == "DC/C1直流配电板断路器": cmd.dcC1DCDistributionPanelCircuitBreaker = state elif breaker_name == "备用断路器1": cmd.reservedCircuitBreaker1 = state elif breaker_name == "备用断路器2": cmd.reservedCircuitBreaker2 = state elif breaker_name == "应急锂电池组2断路器": cmd.emergencyLithiumBatteryGroup2CircuitBreaker = state self.send_udp_command(cmd.pack()) self.db.insertLowMainBusCmd(cmd) self.log_message(f"发送仪表母线配电指令: {breaker_name} {'合' if state else '分'}") def send_lvb_cmd(self, breaker_name, state): """发送仪表汇流排配电指令""" cmd = msg_disLVBCmdMsg() if breaker_name == "单元1断路器": cmd.unit1CircuitBreaker = state elif breaker_name == "单元2断路器": cmd.unit2CircuitBreaker = state elif breaker_name == "单元3断路器": cmd.unit3CircuitBreaker = state elif breaker_name == "单元5断路器": cmd.unit5CircuitBreaker = state elif breaker_name == "艏PZ设备断路器": cmd.bowPZDeviceCircuitBreaker = state elif breaker_name == "备用断路器1": cmd.reservedCircuitBreaker1 = state elif breaker_name == "备用断路器2": cmd.reservedCircuitBreaker2 = state elif breaker_name == "应急锂电池组1断路器": cmd.emergencyLithiumBatteryGroup1CircuitBreaker = state self.send_udp_command(cmd.pack()) self.db.insertLowBusCmd(cmd) self.log_message(f"发送仪表汇流排配电指令: {breaker_name} {'合' if state else '分'}") def udp_receive_loop(self): """UDP接收消息循环""" while self.running: print('接收中') try: data, addr = self.sock.recvfrom(1024) self.process_udp_message(data) print('接收成功') except Exception as e: self.log_message(f"接收错误: {str(e)}") def setup_high_vol_ui(self, parent): """设置高压母线状态界面""" # 初始化故障位列表 self.high_vol_dcdc_fault1_bits = [] self.high_vol_dcdc_fault2_bits = [] frame = ttk.LabelFrame(parent, text="高压母线状态") frame.pack(fill=tk.BOTH, expand=True, padx=5, pady=5) # 使用网格布局管理器 frame.grid_columnconfigure(0, weight=1) frame.grid_columnconfigure(1, weight=1) frame.grid_columnconfigure(2, weight=1) # 电压显示 ttk.Label(frame, text="动力母线电压(V):").grid(row=0, column=0, sticky=tk.W) self.high_vol_power_voltage = ttk.Label(frame, text="0.0") self.high_vol_power_voltage.grid(row=0, column=1, sticky=tk.W) ttk.Label(frame, text="A母线电压(V):").grid(row=0, column=2, sticky=tk.W) self.high_vol_a_voltage = ttk.Label(frame, text="0.0") self.high_vol_a_voltage.grid(row=0, column=3, sticky=tk.W) # 电流显示 ttk.Label(frame, text="动力母线电流(A):").grid(row=1, column=0, sticky=tk.W) self.high_vol_power_current = ttk.Label(frame, text="0.0") self.high_vol_power_current.grid(row=1, column=1, sticky=tk.W) ttk.Label(frame, text="A母线电流(A):").grid(row=1, column=2, sticky=tk.W) self.high_vol_a_current = ttk.Label(frame, text="0.0") self.high_vol_a_current.grid(row=1, column=3, sticky=tk.W) # 断路器状态 ttk.Label(frame, text="断路器状态:").grid(row=2, column=0, columnspan=4, sticky=tk.W) self.high_vol_breakers = {} breaker_names = list(self.status_data["high_vol_bus"]["breakers"].keys()) for i, name in enumerate(breaker_names): ttk.Label(frame, text=name).grid(row=3+i//3, column=(i%3)*2, sticky=tk.W) canvas = tk.Canvas(frame, width=20, height=20, bg="white") canvas.grid(row=3+i//3, column=(i%3)*2+1, sticky=tk.W) self.high_vol_breakers[name] = canvas # 绝缘状态 ttk.Label(frame, text="动力母线绝缘:").grid(row=9, column=0, sticky=tk.W) self.high_vol_power_insulation = ttk.Label(frame, text="正常") self.high_vol_power_insulation.grid(row=9, column=1, sticky=tk.W) ttk.Label(frame, text="A母线绝缘:").grid(row=9, column=2, sticky=tk.W) self.high_vol_a_insulation = ttk.Label(frame, text="正常") self.high_vol_a_insulation.grid(row=9, column=3, sticky=tk.W) # 故障状态 - 扩展显示所有故障位 fault_labels1 = ["过温关机", "输出过流", "输出过压", "输出欠压", "输入过压", "输入欠压", "输出短路保护", "内部故障"] fault_labels2 = ["通信故障", "工作状态", "冷却泵1故障", "冷却泵2故障", "冷却水泄漏", "保留", "保留", "保留"] ttk.Label(frame, text="DC/DC故障字1:").grid(row=10, column=0, sticky=tk.W) for i, label in enumerate(fault_labels1): ttk.Label(frame, text=label).grid(row=11+i//4, column=(i%4)*2, sticky=tk.W) canvas = tk.Canvas(frame, width=20, height=20, bg="white") canvas.grid(row=11+i//4, column=(i%4)*2+1, sticky=tk.W) self.high_vol_dcdc_fault1_bits.append(canvas) ttk.Label(frame, text="DC/DC故障字2:").grid(row=13, column=0, sticky=tk.W) for i, label in enumerate(fault_labels2): ttk.Label(frame, text=label).grid(row=14+i//4, column=(i%4)*2, sticky=tk.W) canvas = tk.Canvas(frame, width=20, height=20, bg="white") canvas.grid(row=14+i//4, column=(i%4)*2+1, sticky=tk.W) self.high_vol_dcdc_fault2_bits.append(canvas) # 绝缘状态 - 详细显示 ttk.Label(frame, text="动力母线绝缘:").grid(row=16, column=0, sticky=tk.W) self.high_vol_power_insulation = ttk.Label(frame, text="正常(0.0MΩ)") self.high_vol_power_insulation.grid(row=16, column=1, sticky=tk.W) ttk.Label(frame, text="A母线绝缘:").grid(row=16, column=2, sticky=tk.W) self.high_vol_a_insulation = ttk.Label(frame, text="正常(0.0MΩ)") self.high_vol_a_insulation.grid(row=16, column=3, sticky=tk.W) # 电流值显示 current_labels = [ ("动力母线电流(A):", "powerBusCurrent"), ("A母线电流(A):", "busbarACurrent"), ("DC/DC5模块电流(A):", "dcDc5ModuleCurrent"), ("推进电机控制箱电流(A):", "propulsionMotorControlBoxCurrent"), ("锂电池组表电流(A):", "lithiumBatteryGroupMeterCurrent"), ("艏高压配电箱电流(A):", "bowHighVoltageDistributionBoxCurrent"), ("艉FT设备45电流(A):", "sternFTDevice45Current"), ("TYZ备用开关电流(A):", "tyzReservedSwitchCurrent"), ("艉舵机开关1电流(A):", "sternRudderSwitch1Current"), ("艉舵机开关2电流(A):", "sternRudderSwitch2Current"), ("FB备用开关电流(A):", "fbReservedSwitchCurrent") ] for i, (label, _) in enumerate(current_labels): ttk.Label(frame, text=label).grid(row=17+i//2, column=(i%2)*2, sticky=tk.W) label_var = ttk.Label(frame, text="0.0") label_var.grid(row=17+i//2, column=(i%2)*2+1, sticky=tk.W) setattr(self, f"high_vol_{current_labels[i][1]}", label_var) # 冷却水压力 ttk.Label(frame, text="冷却水压力(MPa):").grid(row=23, column=0, sticky=tk.W) self.high_vol_cool_water_pressure = ttk.Label(frame, text="0.00") self.high_vol_cool_water_pressure.grid(row=23, column=1, sticky=tk.W) def setup_high_a_vol_ui(self, parent): """设置高压A母线状态界面""" frame = ttk.LabelFrame(parent, text="高压A母线状态") frame.pack(fill=tk.BOTH, expand=True, padx=5, pady=5) # 使用网格布局管理器 frame.grid_columnconfigure(0, weight=1) frame.grid_columnconfigure(1, weight=1) frame.grid_columnconfigure(2, weight=1) # 电压显示 - 添加详细说明 ttk.Label(frame, text="高压B母线电压(V):").grid(row=0, column=0, sticky=tk.W) self.high_a_vol_voltage = ttk.Label(frame, text="0.0") self.high_a_vol_voltage.grid(row=0, column=1, sticky=tk.W) # 电流显示 - 统一格式 ttk.Label(frame, text="高压B母线电流(A):").grid(row=1, column=0, sticky=tk.W) self.high_a_vol_current = ttk.Label(frame, text="0.0") self.high_a_vol_current.grid(row=1, column=1, sticky=tk.W) ttk.Label(frame, text="艏部FT设备123电流(A):").grid(row=2, column=0, sticky=tk.W) self.high_a_vol_bow_ft_current = ttk.Label(frame, text="0.0") self.high_a_vol_bow_ft_current.grid(row=2, column=1, sticky=tk.W) ttk.Label(frame, text="执行机构工作电流(A):").grid(row=3, column=0, sticky=tk.W) self.high_a_vol_actuator_current = ttk.Label(frame, text="0.0") self.high_a_vol_actuator_current.grid(row=3, column=1, sticky=tk.W) # 断路器状态 - 添加详细说明 ttk.Label(frame, text="高压A母线断路器状态:").grid(row=4, column=0, columnspan=4, sticky=tk.W) self.high_a_vol_breakers = {} breaker_names = list(self.status_data["high_a_vol_bus"]["breakers"].keys()) for i, name in enumerate(breaker_names): ttk.Label(frame, text=f"{name}状态:").grid(row=5+i//2, column=(i%2)*2, sticky=tk.W) canvas = tk.Canvas(frame, width=20, height=20, bg="white") canvas.grid(row=5+i//2, column=(i%2)*2+1, sticky=tk.W) self.high_a_vol_breakers[name] = canvas # 报警状态 - 更详细描述 ttk.Label(frame, text="仪表电源故障状态:").grid(row=8, column=0, sticky=tk.W) self.high_a_vol_instrument_power_fault = ttk.Label(frame, text="正常") self.high_a_vol_instrument_power_fault.grid(row=8, column=1, sticky=tk.W) ttk.Label(frame, text="应急电源故障状态:").grid(row=8, column=2, sticky=tk.W) self.high_a_vol_emergency_power_fault = ttk.Label(frame, text="正常") self.high_a_vol_emergency_power_fault.grid(row=8, column=3, sticky=tk.W) ttk.Label(frame, text="进水报警:").grid(row=9, column=0, sticky=tk.W) self.high_a_vol_water_alarm = ttk.Label(frame, text="无") self.high_a_vol_water_alarm.grid(row=9, column=1, sticky=tk.W) def process_udp_message(self, data): """处理接收到的UDP消息""" try: msg_id = int.from_bytes(data[2:4], byteorder='little') if msg_id == 0x0005: # 高压母线状态 msg = msg_disHighVolBusFbMsg() if msg.unpack(data): self.db.insertHighVolBusData(msg) # self.update_high_vol_ui(bus) bus = self.status_data["high_vol_bus"] bus["voltage"]["动力母线电压"] = msg.powerBusVoltage / 10.0 bus["voltage"]["A母线电压"] = msg.busbarAVoltage / 10.0 bus["current"]["动力母线电流"] = msg.powerBusCurrent / 10.0 bus["current"]["DC/DC5模块电流"] = msg.dcDc5ModuleCurrent / 10.0 bus["current"]["推进电机控制箱电流"] = msg.propulsionMotorControlBoxCurrent / 10.0 bus["current"]["A母线电流"] = msg.busbarACurrent / 10.0 bus["current"]["锂电池组仪表电流"] = msg.lithiumBatteryGroupMeterCurrent / 10.0 bus["current"]["艏高压配电盒电流"] = msg.bowHighVoltageDistributionBoxCurrent / 10.0 bus["current"]["艉FT设备45电流"] = msg.sternFTDevice45Current / 10.0 bus["current"]["TYZ备用开关电流"] = msg.tyzReservedSwitchCurrent / 10.0 bus["current"]["艉舵机开关1电流"] = msg.sternRudderSwitch1Current / 10.0 bus["current"]["备用电流1"] = msg.reservedCurrent1 / 10.0 bus["current"]["艉舵机开关2电流"] = msg.sternRudderSwitch2Current / 10.0 bus["current"]["备用电流2"] = msg.reservedCurrent2 / 10.0 bus["current"]["FB备用开关电流"] = msg.fbReservedSwitchCurrent / 10.0 bus["current"]["备用电流3"] = msg.reservedCurrent3 / 10.0 bus["breakers"]["燃料电池断路器"] = msg.fuelCellCircuitBreaker bus["breakers"]["动力锂电池断路器"] = msg.powerLithiumBatteryCircuitBreaker bus["breakers"]["推进电机断路器"] = msg.propulsionMotorCircuitBreaker bus["breakers"]["锂电池组仪表断路器"] = msg.lithiumBatteryGroupInstrumentCircuitBreaker bus["breakers"]["DC/DC模块断路器"] = msg.dcDc5ModuleCircuitBreaker bus["breakers"]["艏高压配电盒断路器"] = msg.bowHighVoltageDistributionBoxCircuitBreaker bus["breakers"]["艉FT设备45断路器"] = msg.sternFTDevice45CircuitBreaker bus["breakers"]["艉舵机开关1断路器"] = msg.sternRudderSwitch1CircuitBreaker bus["breakers"]["艉舵机开关2断路器"] = msg.sternRudderSwitch2CircuitBreaker bus["breakers"]["FB备用断路器"] = msg.fbReservedCircuitBreaker bus["breakers"]["TYZ备用断路器"] = msg.tyzReservedCircuitBreaker bus["breakers"]["备用断路器"] = msg.reservedCircuitBreaker bus["faults"]["DC/DC故障1"] = msg.dcDcFaultWord1 bus["faults"]["DC/DC故障2"] = msg.dcDcFaultWord2 bus["insulation"]["动力母线绝缘状态"] = msg.powerBusInsulationStatus bus["insulation"]["A母线绝缘状态"] = msg.aBusInsulationStatus bus["alarms"]["仪表电源丢失信号"] = msg.meterPowerLossSignal bus["alarms"]["应急电源丢失信号"] = msg.emergencyPowerLossSignal bus["cool_water_pressure"] = msg.coolWaterPressure / 10.0 self.status_data["high_vol_bus"] = bus # 更新UI显示 print(self.status_data) self.log_message("收到高压母线状态更新") elif msg_id == 0x0006: # 高压A母线状态 msg = msg_disHighAVolBusFbMsg() if msg.unpack(data): self.db.insertHighAVolBusData(msg) bus = self.status_data["high_a_vol_bus"] bus["voltage"]["B母线电压"] = msg.busbarBVoltage / 10.0 bus["current"]["B母线电流"] = msg.busbarBCurrent / 10.0 bus["current"]["艏FT设备123电流"] = msg.bowFTDevice123Current / 10.0 bus["current"]["执行机构电流"] = msg.actuatorCurrent / 10.0 bus["current"]["桅舵机控制箱电流"] = msg.mastSteeringGearControlBoxCurrent / 10.0 bus["current"]["XCZ电流"] = msg.xczCurrent / 10.0 bus["current"]["艏舵控制箱电流"] = msg.bowRudderControlBoxCurrent / 10.0 bus["current"]["开盖启动气缸电流"] = msg.openWaterCoverStartCylinderCurrent / 10.0 bus["breakers"]["艏FT设备123断路器"] = msg.bowFTDevice123CircuitBreaker bus["breakers"]["执行机构断路器"] = msg.actuatorCircuitBreaker bus["breakers"]["桅舵机控制箱断路器"] = msg.mastSteeringGearControlBoxCircuitBreaker bus["breakers"]["XCZ断路器"] = msg.xczCircuitBreaker bus["breakers"]["艏舵控制箱断路器"] = msg.bowRudderControlBoxCircuitBreaker bus["breakers"]["开盖启动气缸断路器"] = msg.openWaterCoverStartCylinderCircuitBreaker bus["alarms"]["仪表电源故障"] = msg.instrumentPowerFailureSignal bus["alarms"]["应急电源故障"] = msg.emergencyPowerFailureSignal bus["alarms"]["进水报警"] = msg.waterIngressionAlarm self.log_message("收到高压A母线状态更新") elif msg_id == 0x0007: # 仪表主母线状态 msg = msg_disLowMainBusFbMsg() if msg.unpack(data): self.db.insertLowMainBusData(msg) bus = self.status_data["low_main_bus"] bus["voltage"]["仪表母线电压"] = msg.instrumentBusbarVoltage / 10.0 bus["voltage"]["应急2母线电压"] = msg.emergency2BusbarVoltage / 10.0 bus["current"]["艏低压配电盒电流"] = msg.bowLowVoltageDistributionBoxCurrent / 10.0 bus["current"]["DC/C1仪表48V电流"] = msg.dcC1InstrumentDC48VCurrent / 10.0 bus["current"]["备用电流1"] = msg.reservedCurrent1 / 10.0 bus["current"]["应急锂电池组2电流"] = msg.emergencyLithiumBatteryGroup2Current / 10.0 bus["current"]["锂电池组仪表电流"] = msg.lithiumBatteryGroupInstrumentCurrent / 10.0 bus["current"]["单元4仪表48V电流"] = msg.unit4InstrumentDC48VCurrent / 10.0 bus["current"]["备用电流2"] = msg.reservedCurrent2 / 10.0 bus["current"]["综合能量管理系统应急DC48V电流"] = msg.compositeEnergyManagementSystemEmergencyDC48VCurrent / 10.0 bus["current"]["燃料电池安全系统应急DC48V电流"] = msg.fuelCellSecuritySystemEmergencyDC48VCurrent / 10.0 bus["current"]["PLC控制电源电流"] = msg.plcControlPowerCurrent / 10.0 bus["breakers"]["锂电池组仪表断路器"] = msg.lithiumBatteryGroupInstrumentCircuitBreaker bus["breakers"]["艏低压配电盒断路器"] = msg.bowLowVoltageDistributionBoxCircuitBreaker bus["breakers"]["单元4仪表48V断路器"] = msg.unit4InstrumentDC48VCircuitBreaker bus["breakers"]["DC/C1直流配电板断路器"] = msg.dcC1DCDistributionPanelCircuitBreaker bus["breakers"]["备用断路器1"] = msg.reservedCircuitBreaker1 bus["breakers"]["备用断路器2"] = msg.reservedCircuitBreaker2 bus["breakers"]["应急锂电池组2断路器"] = msg.emergencyLithiumBatteryGroup2CircuitBreaker bus["alarms"]["仪表电源故障"] = msg.instrumentPowerFailureSignal bus["alarms"]["应急电源故障"] = msg.emergencyPowerFailureSignal bus["insulation"] = msg.instrumentBusbarInsulationLow self.log_message("收到仪表主母线状态更新") elif msg_id == 0x0008: # 仪表母线状态 msg = msg_disLowBusFbMsg() if msg.unpack(data): self.db.insertLowBusData(msg) bus = self.status_data["low_bus"] bus["voltage"]["仪表母线电压"] = msg.instrumentBusbarVoltage / 10.0 bus["voltage"]["应急1母线电压"] = msg.emergency1BusbarVoltage / 10.0 bus["current"]["仪表母线电流"] = msg.instrumentBusbarCurrent / 10.0 bus["current"]["单元1电流"] = msg.unit1Current / 10.0 bus["current"]["单元2电流"] = msg.unit2Current / 10.0 bus["current"]["单元3电流"] = msg.unit3Current / 10.0 bus["current"]["单元5电流"] = msg.unit5Current / 10.0 bus["current"]["艏PZ设备电流"] = msg.bowPZDeviceCurrent / 10.0 bus["current"]["应急锂电池组1电流"] = msg.emergencyLithiumBatteryGroup1Current / 10.0 bus["breakers"]["单元1断路器"] = msg.unit1CircuitBreaker bus["breakers"]["单元2断路器"] = msg.unit2CircuitBreaker bus["breakers"]["单元3断路器"] = msg.unit3CircuitBreaker bus["breakers"]["单元5断路器"] = msg.unit5CircuitBreaker bus["breakers"]["艏PZ设备断路器"] = msg.bowPZDeviceCircuitBreaker bus["breakers"]["备用断路器1"] = msg.reservedCircuitBreaker1 bus["breakers"]["备用断路器2"] = msg.reservedCircuitBreaker2 bus["breakers"]["应急锂电池组1断路器"] = msg.emergencyLithiumBatteryGroup1CircuitBreaker bus["alarms"]["电源故障信号"] = msg.powerFailureSignal bus["alarms"]["进水报警"] = msg.waterIngressionAlarm self.log_message("收到仪表母线状态更新") else: self.log_message("消息解析失败") print('消息处理完成') except Exception as e: self.log_message(f"消息处理错误: {str(e)}") def setup_low_main_ui(self, parent): """设置仪表主母线状态界面""" frame = ttk.LabelFrame(parent, text="仪表主母线状态") frame.pack(fill=tk.BOTH, expand=True, padx=5, pady=5) # 电压显示 ttk.Label(frame, text="仪表母线电压(V):").grid(row=0, column=0, sticky=tk.W) self.low_main_instrument_voltage = ttk.Label(frame, text="0.0") self.low_main_instrument_voltage.grid(row=0, column=1, sticky=tk.W) ttk.Label(frame, text="应急2母线电压(V):").grid(row=0, column=2, sticky=tk.W) self.low_main_emergency2_voltage = ttk.Label(frame, text="0.0") self.low_main_emergency2_voltage.grid(row=0, column=3, sticky=tk.W) # 电流显示 ttk.Label(frame, text="艏低压配电盒电流(A):").grid(row=1, column=0, sticky=tk.W) self.low_main_bow_current = ttk.Label(frame, text="0.0") self.low_main_bow_current.grid(row=1, column=1, sticky=tk.W) ttk.Label(frame, text="锂电池组仪表电流(A):").grid(row=1, column=2, sticky=tk.W) self.low_main_battery_current = ttk.Label(frame, text="0.0") self.low_main_battery_current.grid(row=1, column=3, sticky=tk.W) # 断路器状态 ttk.Label(frame, text="断路器状态:").grid(row=2, column=0, columnspan=4, sticky=tk.W) self.low_main_breakers = {} breaker_names = list(self.status_data["low_main_bus"]["breakers"].keys()) for i, name in enumerate(breaker_names): row = 3 + i//2 col = (i%2)*2 ttk.Label(frame, text=name).grid(row=row, column=col, sticky=tk.W) canvas = tk.Canvas(frame, width=20, height=20, bg="white") canvas.grid(row=row, column=col+1, sticky=tk.W) self.low_main_breakers[name] = canvas # 报警状态 ttk.Label(frame, text="仪表电源故障:").grid(row=8, column=0, sticky=tk.W) self.low_main_instrument_fault = ttk.Label(frame, text="无") self.low_main_instrument_fault.grid(row=8, column=1, sticky=tk.W) ttk.Label(frame, text="应急电源故障:").grid(row=8, column=2, sticky=tk.W) self.low_main_emergency_fault = ttk.Label(frame, text="无") self.low_main_emergency_fault.grid(row=8, column=3, sticky=tk.W) # 报警状态 ttk.Label(frame, text="仪表电源故障:").grid(row=8, column=0, sticky=tk.W) self.low_main_instrument_fault = ttk.Label(frame, text="无") self.low_main_instrument_fault.grid(row=8, column=1, sticky=tk.W) ttk.Label(frame, text="应急电源故障:").grid(row=8, column=2, sticky=tk.W) self.low_main_emergency_fault = ttk.Label(frame, text="无") self.low_main_emergency_fault.grid(row=8, column=3, sticky=tk.W) # 绝缘状态 ttk.Label(frame, text="绝缘状态:").grid(row=9, column=0, sticky=tk.W) self.low_main_insulation = ttk.Label(frame, text="正常") self.low_main_insulation.grid(row=9, column=1, sticky=tk.W) return frame def setup_low_bus_ui(self, parent): """设置仪表母线状态界面""" frame = ttk.LabelFrame(parent, text="仪表母线状态") frame.pack(fill=tk.BOTH, expand=True, padx=5, pady=5) # 电压显示 ttk.Label(frame, text="仪表母线电压(V):").grid(row=0, column=0, sticky=tk.W) self.low_bus_instrument_voltage = ttk.Label(frame, text="0.0") self.low_bus_instrument_voltage.grid(row=0, column=1, sticky=tk.W) ttk.Label(frame, text="应急1母线电压(V):").grid(row=0, column=2, sticky=tk.W) self.low_bus_emergency1_voltage = ttk.Label(frame, text="0.0") self.low_bus_emergency1_voltage.grid(row=0, column=3, sticky=tk.W) # 电流显示 ttk.Label(frame, text="单元1电流(A):").grid(row=1, column=0, sticky=tk.W) self.low_bus_unit1_current = ttk.Label(frame, text="0.0") self.low_bus_unit1_current.grid(row=1, column=1, sticky=tk.W) ttk.Label(frame, text="单元2电流(A):").grid(row=1, column=2, sticky=tk.W) self.low_bus_unit2_current = ttk.Label(frame, text="0.0") self.low_bus_unit2_current.grid(row=1, column=3, sticky=tk.W) # 断路器状态 ttk.Label(frame, text="断路器状态:").grid(row=2, column=0, columnspan=4, sticky=tk.W) self.low_bus_breakers = {} breaker_names = list(self.status_data["low_bus"]["breakers"].keys()) for i, name in enumerate(breaker_names): row = 3 + i//2 col = (i%2)*2 ttk.Label(frame, text=name).grid(row=row, column=col, sticky=tk.W) canvas = tk.Canvas(frame, width=20, height=20, bg="white") canvas.grid(row=row, column=col+1, sticky=tk.W) self.low_bus_breakers[name] = canvas # 报警状态 ttk.Label(frame, text="电源故障信号:").grid(row=8, column=0, sticky=tk.W) self.low_bus_power_fault = ttk.Label(frame, text="无") self.low_bus_power_fault.grid(row=8, column=1, sticky=tk.W) ttk.Label(frame, text="进水报警:").grid(row=8, column=2, sticky=tk.W) self.low_bus_water_alarm = ttk.Label(frame, text="无") self.low_bus_water_alarm.grid(row=8, column=3, sticky=tk.W) # 报警状态 ttk.Label(frame, text="电源故障信号:").grid(row=8, column=0, sticky=tk.W) self.low_bus_power_fault = ttk.Label(frame, text="无") self.low_bus_power_fault.grid(row=8, column=1, sticky=tk.W) ttk.Label(frame, text="进水报警:").grid(row=8, column=2, sticky=tk.W) self.low_bus_water_alarm = ttk.Label(frame, text="无") self.low_bus_water_alarm.grid(row=8, column=3, sticky=tk.W) return frame def send_udp_command(self, data): """发送UDP命令""" try: self.sock.sendto(data, (self.udp_ip, self.udp_port + 1)) except Exception as e: self.log_message(f"发送命令失败: {str(e)}") def update_high_vol_ui(self, status): """更新高压母线UI显示""" # 更新电压显示 self.high_vol_power_voltage.config(text=f"{status['voltage']['动力母线电压']:.1f}") self.high_vol_a_voltage.config(text=f"{status['voltage']['A母线电压']:.1f}") # 更新电流显示 self.high_vol_power_current.config(text=f"{status['current']['动力母线电流']:.1f}") self.high_vol_a_current.config(text=f"{status['current']['A母线电流']:.1f}") # 更新所有电流值 current_vars = [ ('powerBusCurrent', '动力母线电流'), ('busbarACurrent', 'A母线电流'), ('dcDc5ModuleCurrent', 'DC/DC5模块电流'), ('propulsionMotorControlBoxCurrent', '推进电机控制箱电流'), ('lithiumBatteryGroupMeterCurrent', '锂电池组仪表电流'), ('bowHighVoltageDistributionBoxCurrent', '艏高压配电盒电流'), ('sternFTDevice45Current', '艉FT设备45电流'), ('tyzReservedSwitchCurrent', 'TYZ备用开关电流'), ('sternRudderSwitch1Current', '艉舵机开关1电流'), ('sternRudderSwitch2Current', '艉舵机开关2电流'), ('fbReservedSwitchCurrent', 'FB备用开关电流') ] for var_name, data_key in current_vars: label = getattr(self, f"high_vol_{var_name}") label.config(text=f"{status['current'][data_key]:.1f}") # 更新断路器状态 for name, state in status['breakers'].items(): if name in self.high_vol_breakers: color = 'green' if state else 'red' self.high_vol_breakers[name].config(background=color) # 更新DC/DC故障状态 dcdc_fault1 = status['faults']['DC/DC故障1'] dcdc_fault2 = status['faults']['DC/DC故障2'] for i in range(8): color1 = 'red' if (dcdc_fault1 & (1 << i)) else 'green' color2 = 'red' if (dcdc_fault2 & (1 << i)) else 'green' self.high_vol_dcdc_fault1_bits[i].config(bg=color1) self.high_vol_dcdc_fault2_bits[i].config(bg=color2) # 更新绝缘状态 insulation_power = status['insulation']['动力母线绝缘状态'] insulation_a = status['insulation']['A母线绝缘状态'] power_text = "故障" if insulation_power else f"正常({status['voltage']['动力母线电压']:.1f}MΩ)" a_text = "故障" if insulation_a else f"正常({status['voltage']['A母线电压']:.1f}MΩ)" self.high_vol_power_insulation.config(text=power_text) self.high_vol_a_insulation.config(text=a_text) # 更新冷却水压力 self.high_vol_cool_water_pressure.config(text=f"{status['cool_water_pressure']:.2f}") def update_ui(self): """更新界面状态""" # 更新高压母线状态 high_vol = self.status_data["high_vol_bus"] self.update_high_vol_ui(high_vol) # 更新高压A母线状态 high_a_vol = self.status_data["high_a_vol_bus"] self.high_a_vol_voltage.config(text=f"{high_a_vol['voltage']['B母线电压']:.1f} V") self.high_a_vol_current.config(text=f"{high_a_vol['current']['B母线电流']:.1f} A") self.high_a_vol_bow_ft_current.config(text=f"{high_a_vol['current']['艏FT设备123电流']:.1f} A") self.high_a_vol_actuator_current.config(text=f"{high_a_vol['current']['执行机构电流']:.1f} A") for name, canvas in self.high_a_vol_breakers.items(): state = high_a_vol["breakers"].get(name, 0) color = "green" if state else "red" canvas.create_oval(2, 2, 18, 18, fill=color, outline="black") # 更新仪表主母线状态 low_main = self.status_data["low_main_bus"] for name, canvas in self.low_main_breakers.items(): state = low_main["breakers"].get(name, 0) color = "green" if state else "red" canvas.create_oval(2, 2, 18, 18, fill=color, outline="black") # 更新仪表母线状态 low_bus = self.status_data["low_bus"] for name, canvas in self.low_bus_breakers.items(): state = low_bus["breakers"].get(name, 0) color = "green" if state else "red" canvas.create_oval(2, 2, 18, 18, fill=color, outline="black") self.high_a_vol_instrument_power_fault.config( text="无" if not high_a_vol["alarms"]["仪表电源故障"] else "有" ) self.high_a_vol_emergency_power_fault.config( text="无" if not high_a_vol["alarms"]["应急电源故障"] else "有" ) self.high_a_vol_water_alarm.config( text="无" if not high_a_vol["alarms"]["进水报警"] else "有" ) # 更新仪表主母线状态 low_main = self.status_data["low_main_bus"] self.low_main_instrument_voltage.config(text=f"{low_main['voltage']['仪表母线电压']:.1f} V") self.low_main_emergency2_voltage.config(text=f"{low_main['voltage']['应急2母线电压']:.1f} V") self.low_main_bow_current.config(text=f"{low_main['current']['艏低压配电盒电流']:.1f}") self.low_main_battery_current.config(text=f"{low_main['current']['锂电池组仪表电流']:.1f} A") self.low_main_bow_current.config(text=f"{low_main['current']['艏低压配电盒电流']:.1f} A") for name, canvas in self.low_main_breakers.items(): state = low_main["breakers"].get(name, 0) color = "green" if state else "red" canvas.create_oval(2, 2, 18, 18, fill=color, outline="black") self.low_main_instrument_fault.config( text="无" if not low_main["alarms"]["仪表电源故障"] else "有" ) self.low_main_emergency_fault.config( text="无" if not low_main["alarms"]["应急电源故障"] else "有" ) self.low_main_insulation.config( text="正常" if not low_main["insulation"] else "异常" ) # 更新仪表母线状态 low_bus = self.status_data["low_bus"] self.low_bus_instrument_voltage.config(text=f"{low_bus['voltage']['仪表母线电压']:.1f} V") self.low_bus_emergency1_voltage.config(text=f"{low_bus['voltage']['应急1母线电压']:.1f} V") self.low_bus_unit1_current.config(text=f"{low_bus['current']['单元1电流']:.1f}") self.low_bus_unit2_current.config(text=f"{low_bus['current']['单元2电流']:.1f}") for name, canvas in self.low_bus_breakers.items(): state = low_bus["breakers"].get(name, 0) color = "green" if state else "red" canvas.create_oval(2, 2, 18, 18, fill=color, outline="black") self.low_bus_power_fault.config( text="无" if not low_bus["alarms"]["电源故障信号"] else "有" ) self.low_bus_water_alarm.config( text="无" if not low_bus["alarms"]["进水报警"] else "有" ) print('update_ui') # 每500ms更新一次 self.root.after(1000, self.update_ui) def log_message(self, message): """记录日志消息""" timestamp = time.strftime("%Y-%m-%d %H:%M:%S") self.log_text.config(state=tk.NORMAL) self.log_text.insert(tk.END, f"[{timestamp}] {message}\n") self.log_text.config(state=tk.DISABLED) self.log_text.see(tk.END) def on_closing(self): """窗口关闭事件处理""" self.running = False self.sock.close() self.root.destroy() if __name__ == "__main__": root = tk.Tk() app = PowerManagerApp(root) root.protocol("WM_DELETE_WINDOW", app.on_closing) print('start') root.mainloop() print('end')